Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: bankshot on May 06, 2020, 07:51:28 PM
-
computer crashed, gotta buy new one, or refurb, running windows 7 Hp,, my questions is what windows version should i look for. ive heard of problems with 10 how about windows xp professional?? if i need 7 hp ill look until i find it,,only experience with this was i found out windows 8 sucked bty, im using parralell port
-
Hi,
if you wish to continue with a parallel port then you MUST use 32 bit Windows 7 or earlier. XP Pro would be fine if it 32 bit?
Machs parallel port will not operate with ANY 64 bit OS.
If you wish to use a 64 bit OS, or Windows 10 (which works perfectly well by the way), or a laptop the you need an external motion
controller like an Ethernet SmoothStepper or a UC300.
Craig
-
i dont see my answer but was trying to thanks you
larry
-
Hi,
its simple:
Parallel port = Windows 7 or XP, must be 32 bit
External Motion controller = Any Windows OS, either 32 bit or 64 bit, and Laptops
Craig