Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: dimitrislamia on April 14, 2020, 08:55:02 AM

Title: How to hold the keypress on jogging?
Post by: dimitrislamia on April 14, 2020, 08:55:02 AM
Hello everyone, i am sure that a long time ago, before my mill broke down, i used a lot of manual milling withholding a combination of keys, including the arrow from the axis i wanted to move, i have search as far as i had the patient, maybe cause my mother language is not Eglish i do not search the right terms,so i need your help, please.

What is the combination key to use a manual feed/jog with the arrows?
I remeber it could only be used if i use the arrows on the Numeric pad of the keyboard and could stop it by hitting Esc button.

Thank you alot.

P.S. I do not want to use the MDI line or any G-Code, just the sortcut keys that hold the Arrow Keypress until i hit Esc.