Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Howard1 on March 18, 2020, 10:46:42 AM

Title: M10 and M11 Problem Closing Program
Post by: Howard1 on March 18, 2020, 10:46:42 AM

I am using the M10 and M11 command on an Opt Laser I mounted to my CNC. The job works perfectly but when I am done and exit Mach 3 I get an error triggered and have to close out. It does not save the fixture as it normally does. When I restart I have to reference all home. I have seen a previous post and was wondering if anyone has figured out a fix for this. I am running a CNCROUTERPARTS Desktop Pro. with the Opt Laser attached. here is a link showing that it works just can't exit without an error. https://youtu.be/U3OVCQas13Q (https://youtu.be/U3OVCQas13Q)