Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Ow on March 09, 2020, 09:55:18 PM

Title: No response to any CV settings in mach4
Post by: Ow on March 09, 2020, 09:55:18 PM

Just in the process of upgrading to Mach4 from mach3 and everything is working great except for Constant Velocity..

I am calling the g56 enable code and motion mode is set to constant velocity in mach's settings. I am using the same known good gcode that works great on mach3 with CV.

I have tried using the wizards to configure the CV settings and also manually adjusting it in the machine.ini file. No matter what direction I go with the settings I get no response. Machine keeps running in exact stop mode.

My machine uses an ESS with build 253 plugin and Mach4 4322.

Hopefully its a simple fix. Happy to pay for someones time to solve the problem for me!

Thanks.

Title: Re: No response to any CV settings in mach4
Post by: Graham Waterworth on March 11, 2020, 08:01:38 PM

Try using G61/G64 they control CV, G56 is a fixture offset

Title: Re: No response to any CV settings in mach4
Post by: Ow on March 12, 2020, 10:45:12 AM

Hey Graham thanks for the reply. Yeah I am using g61/g64 I guess I just noted wrong code in my post.