Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: chessie on February 21, 2020, 02:13:32 PM

Title: mach4 lathe css
Post by: chessie on February 21, 2020, 02:13:32 PM
Sorry for asking a stupid question

but if convert to mach4 from mach3 turn   .Does the css work properly ie altering the feed rate as well as the spindle speed to match .

thanks

Title: Re: mach4 lathe css
Post by: Graham Waterworth on February 21, 2020, 02:24:00 PM
Yes it works like a dream in Mach4