Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Baughb on April 04, 2006, 04:28:31 PM

Title: Cadlink Signlab 7.0
Post by: Baughb on April 04, 2006, 04:28:31 PM

I am retrofitting a home built router and using Signlab to generate my cut files. The router has 3 stepper motors and I am using Mach 3 to run the router. I have successfully output a polylineDXF file from Signlab and cut it on the router. The one feature that I can't figure out how to accomplish is the S-Sweep to cut out the background and leave the border and the letters for a sign. Does anyone have any experience on what type of command and what type of output file that works best for this operation?

Title: Re: Cadlink Signlab 7.0
Post by: Brian Barker on April 05, 2006, 09:54:38 AM

There are others in here that should be able to help... I cut parts for machines so I am no help :(