Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: jamesfiore30@gmail.com on January 24, 2020, 04:09:24 PM
-
I can only find some mach 3 info on this which did not seem to work. After closing mach4 the changes I made are not saved. Mainly the x axis reverses and any keypad mapping I added disappears.
What I have tried so far is to right click on mach4 then made my way into the security tab and unchecked "write" under the permission section... nothing changed.
Thanks guys!
-
Hi,
Were you installing Mach4 to its default installation directory C:/Mach4Hobby/ ?
If not make sure that there are no spaces in the installation path. At first I installed it to C:/Program Files (x86)/Mach4Hobby/ but that causes many problems in regards to saving/loading files.
Best regards
Brandon
-
Did you solve your issue? I’m having the same problem