Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: fish.norling@gmail.om on January 20, 2020, 08:27:39 PM
-
Had my lathe down for a little maintenance and when I brought it back up, had a problem, can't get my head around it or find a solution. If I tell the x axis to move 2.5 inches, it moves 2.5 inches. If I tell the tool to take a .010 cut in diameter mode, it cuts .020. If I tell it to cut .010 in radius mode, it cuts .020. No matter what I do... I don't get it. Any ideas?