Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: fatihsahin07 on January 12, 2020, 06:53:18 AM
-
Hii,
I built my own 3d printer. It has 40cm³ working area. I used 8mm Lead-Screw rod and chineese nema 17 stepper motor with 200 steps (1.8°)
I couldn't set my mach3 velocity/acceralation setting. I am having problem while it's 3d printing. It print aslant like /
My drivers is setted up to 1600pulse.
How can i fix this problem?
-
My guess is that you are loosing steps. Please read;
https://www.machsupport.com/forum/index.php?action=dlattach;topic=26252.0;attach=36629
In particular the Motor Tuning section will help you set-up your Velocity and Acceleration.