Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: mgreb on December 29, 2019, 02:49:17 AM

Title: Cannot get offsets to work in mach3
Post by: mgreb on December 29, 2019, 02:49:17 AM

what is the trick to get offsets to work in mach3?

I have a hobby machine and change the tools by hand, I have offsets in the offset file, and when I do a t#M6 the display shows that the tool# and offset number is active, but the machine does not taking the offset change.  Am I missing a setting or sometning?

Title: Re: Cannot get offsets to work in mach3
Post by: TPS on December 29, 2019, 04:31:26 AM

there has to be a G43H# (#=toolnumber) in your M6 macro.