Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: skaha on September 15, 2007, 12:40:57 PM
-
I am looking at the three programs listed, I would like your opinions and ideas.
Thanks
-
If price is of no problem then :-
OneCNC or AlphaCAM
Graham.
-
With endless funds.. ;D
My choice would be Catia V5 Advanced machining..
One seat is about 90k$ + 15% yearly maintenance, but the software is very good.
Mstcnc