Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Joemac on November 12, 2019, 02:18:01 PM

Title: Mach 3 Turn tool-path arcs become circles
Post by: Joemac on November 12, 2019, 02:18:01 PM
I am using Fusion 360 to generate a tool-path for an outside contour for Mach 3 Turn. Whenever I come to a fillet it wants to generate a full or partial circle instead of just cutting the damn fillet. I can produce the proper tool-path by messing with (swapping) G2 and G3 and/or swapping IJ mode between absolute and incremental mode but I just have to play with them until I get lucky.

I have attached a sample screenshot of an example.  Heelllp.  :P