Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: williecnc on September 11, 2007, 09:59:11 PM

Title: Lazy Cam Problem
Post by: williecnc on September 11, 2007, 09:59:11 PM

I am learning how to use lazycam and have a problem when I process a DXF.
When I post to Mach3 the routine cuts fine, BUT it also cuts all the lead in symbols.
What is it that I am missing.

WJF

Title: Re: Lazy Cam Problem
Post by: ergoman on September 13, 2007, 10:03:37 PM

Greetings, WFJ. Have you tried to turn off the leadins? When you say lead-in symbols, do you mean the straight, slant, or circular lead-ins? Some might use lead-ins but I use plunge-able router bits and cut in wood, so I don't need 'em.

Title: Re: Lazy Cam Problem
Post by: williecnc on September 14, 2007, 04:26:41 AM

Quote from: ergoman on September 13, 2007, 10:03:37 PM

Greetings, WFJ. Have you tried to turn off the leadins? When you say lead-in symbols, do you mean the straight, slant, or circular lead-ins? Some might use lead-ins but I use plunge-able router bits and cut in wood, so I don't need 'em.

Thanks for the reply.
That solved the problem
wjf