Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: paragon on October 17, 2019, 06:39:57 PM

Title: G code with user variable
Post by: paragon on October 17, 2019, 06:39:57 PM
Hi..am looking to run a simple program that would move in x a certain distance, then stop..z up.. and ask user for a second y position before continuing...have mach 3 in xp

Thanks
Title: Re: G code with user variable
Post by: Graham Waterworth on October 21, 2019, 07:40:12 PM
would it not be better to have the second position in the gcode