Machsupport Forum
Support => Downloads => Post Processors => Topic started by: Ryanstewart86 on September 09, 2007, 08:46:50 AM
-
Hi guys
i found this mach3 postprocessor for mastercam 9 and i converted it to the mastercam x format through the mastercam software which it allows you to do so and here it is:
Mastercam 9 format: http://cnc.novalab.org/files/MACH3B_for_MC9.zip
Mastercam X format is attached
It supports 3 or 4 axis machines!
Hope you find it useful!
Ryanstewart86
-
Thankyou very much!!!
Tiwanacote!
-
Gracias por su aporte, en espera de poder ser util a ustedes.
-
Saludos encontre un driver paso direccion y trabaja bien con Mach3 y los datos son los siguientes: SERVOPACK YASKAWA-onronAC IMPUTMODEL SJDE-08 APA-0Y1 PH 200-220 v-50-60 HZ 8.9 A AC-OUTPUTĀ· PH. 0 230V- 0 300 HZ3.7A-750 W todo hecho en CHINA
-
I have been using this post with MC9 for years works great is there a way to remove the () in MC's toolpath manual entry EX:
(G91 A60.0 F50.0)
(G90)
-
Hello Sir,
How can I insert this post file to Matser Cam 10. Please give me instruction. I found some post file for MasterCam 10. This will come with other MMD file and control file including pst file. Please.....
High Tech Key
-
Thank Kyou..
sir...