Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: MachineMan66 on August 12, 2019, 04:34:25 PM

Title: Paralell Port address
Post by: MachineMan66 on August 12, 2019, 04:34:25 PM

Trying to figure this out. computer crashed and reloaded Win7, and all the drivers, on the LPT1 it shows I/O CFE8-CFEF, I/O CFE0-CFE7, on LPT2 it shows i/o DEFC-DEFF. What do I use to enter into Mach3 port? Or is there a way to change it?