Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: buddhi champika on August 08, 2019, 03:37:35 AM

Title: pockets cuts undersized when cutting but contours are accurate
Post by: buddhi champika on August 08, 2019, 03:37:35 AM

 :( hello guys,

when I'm cutting pockets the pocket get 0.5mm less, there is nothing wrong with the CNC cause when cutting contours it gets cut accurately.

please check the files below

Thank You!

Title: Re: pockets cuts undersized when cutting but contours are accurate
Post by: alextulanov@gmail.com on January 21, 2020, 05:08:20 AM

I also have  this problem.

Title: Re: pockets cuts undersized when cutting but contours are accurate
Post by: jim711 on May 20, 2020, 02:23:48 PM

Have you checked your bit with a micrometer?