Machsupport Forum
Mach Discussion => Mach Screens => Finished Screens => Topic started by: Graham Waterworth on July 11, 2019, 02:10:21 PM
-
Here you are have a play with this new Mach3 only Lathe Screen set.
Its got big buttons so will work with touchscreens and is colourful, this is because it was originally for education use but I was asked to make a general version because people liked it.
The only things that will change are if bugs are found in it. Nothing will be added or changed that is up to you to do.
Its not like the standard lathe set, if you click the same green option button some of the screens cycle around different options, Position, Offset and Automatic all do this and the last screen is remembered.
That's it, see what you think.
Update:-
I have added the portrait version now so you can turn your monitor on its side.
-
Have you by any chance built a Mach4 Version of this?
Si
-
There is a Mach4 Mill/Router version but not Lathe.
http://www.machsupport.com/forum/index.php?action=dlattach;topic=35438.0;attach=46697 (http://www.machsupport.com/forum/index.php?action=dlattach;topic=35438.0;attach=46697)