Machsupport Forum
General CNC Chat => Building or Buying a Wood routing table.. Beginnners guide.. => Topic started by: lumber60 on June 21, 2019, 03:19:44 PM
-
This is a inexpensive way to find out if you need to invest in the more expensive cnc programs or not. Some of you are just in it for fun as I am, this is great for me!
I am a retired custom cabinet maker and needed a hobby with minimal investment.
The things i make keeps the grand kids happy.
Doesn't hurt to take a look and see! https://deftware.itch.io/pixelcnc
I might consider trying Fusion 360, been bouncing on it as to the expense and do i really need it. Don't know!! Pretty content right now. Can't justify the cost!
lumber60
-
Fusion 360 is free to hobbyists
-
I loaded the hobbyist version Autodesk Fusion 360 again yesterday ,still confusing to me with all of the different terminology etc. I understand some of it but can't even figure out how to get something started on the canvas,
Looks like a very large and confusing learning curve to me.
I will try to find time in between things to look at it some more.
lumer60
-
YouTube is your friend.
-
2 hours of clicking and you tube in between and still no image loaded. FRUSTRATED ALL READY but not giving up yet. Even the you tube directions for loading/inserting SVG images didn't work!
Back to inkscape and PixelCNC, need to get some things made. Granddaughter coming today and will want to make some things so i need to have my part done.
lumber60
-
If you just want to cut .svg files, then Fusion is not the best way top go about it.
When I saw your first posts about Pixel CNC, I almost bought it.
But I played with the demo, and found it to be extremely buggy, with a really difficult to use interface.
-
Hi,
all CAD programs have similarities. Drawing is a matter of composing geometry and then extruding, sweeping etc
to create 3D bodies.
If you wish to use CAD/CAM you'll just have to stick with it until you get the hang of it.
Craig