Machsupport Forum

Mach Discussion => Mach Screens => Works in progress => Topic started by: Graham Waterworth on June 17, 2019, 09:16:31 PM

Title: Coming soon to a lathe near you
Post by: Graham Waterworth on June 17, 2019, 09:16:31 PM

Well folks here is a new lathe screen.

I am just finishing off a few bits and then the Mach3 version will be ready for you all to try.

This is a wide screen set best at 1366 x 768

This was done for education so its colourful and easy to read and use.  Most of what you need is there if its not well its tough.

Bug fixes is all that will change.

Title: Re: Coming soon to a lathe near you
Post by: RICH on June 18, 2019, 05:28:35 AM

Graham,
Nice work on the screen set.

RICH

Title: Re: Coming soon to a lathe near you
Post by: Overloaded on June 18, 2019, 06:32:06 AM

Hi Graham !
This one looks really good.
I like the way the left side stays the same on all and has all of the pertinent goodies.
Anxious to try it out.
When do expect to post it ?
What are you going to charge for it ?

Thanks again,
Russ

Title: Re: Coming soon to a lathe near you
Post by: Graham Waterworth on June 18, 2019, 09:03:12 AM

Here are some images of the Portrait version of the screens, again 768 x 1366 or can be scaled to any widescreen size.

Title: Re: Coming soon to a lathe near you
Post by: Graham Waterworth on June 22, 2019, 08:38:07 AM

A few more screen shots

Title: Simple Colourful lathe Screen Set Mach3 Only
Post by: Graham Waterworth on July 21, 2019, 04:54:04 PM

The horizontal screen set is now available to download in the finished screen section.

https://www.machsupport.com/forum/index.php?topic=41385.msg271329#msg271329 (https://www.machsupport.com/forum/index.php?topic=41385.msg271329#msg271329)