Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: timkel on May 15, 2019, 09:49:56 AM
-
I went to try www.makercam.com but the page only partially loads. I tried several different browsers and all open with the same problem. Are there any other web based Cam sites out there?
-
This is all I get.
(https://i.postimg.cc/G29qVrKN/201.jpg) (https://postimg.cc/Fd5ykM2g)
-
I found a work around at the Maslow site for now.
http://maslowmakercam.000webhostapp.com/
-
This is all I get.
(https://i.postimg.cc/G29qVrKN/201.jpg) (https://postimg.cc/Fd5ykM2g)
Makercam.com will work ONLY with updated adobe flashplayer.
I download and installed latest adobe flashplayer for IE11 and makercam.com works 100% under microsoft IE11.
It won't work under CHROMIUM based browser that now only support HTML5 and not flashplayer.
-
Ok , I'll try IE11. thanks
-
Update:
Makarcam will not work on my Win10 with IE11
Makercam does work on my Win10 with chrome browser here http://maslowmakercam.000webhostapp.com/
Makercam does work on my Win XP with chrome browser here http://maslowmakercam.000webhostapp.com/
-
Neither Makercam nor the alternate site work. The alternate site seems to have been discontinued.
Is there an alternative that you might recommend - my goal is to convert SVG to GCODE as described in https://youtu.be/8kfNAhM_NLg
Thanks!
Peter