Machsupport Forum

Mach Discussion => FAQs => Topic started by: Garysb56 on March 18, 2019, 09:43:52 PM

Title: chines spindle setup
Post by: Garysb56 on March 18, 2019, 09:43:52 PM

Hi, i am running mach3 and G11c BOB with a chines 2.2k. having trouble getting the software to run and control the spindle. Anyone have have any luck get the chines spindle to work

Title: Re: chines spindle setup
Post by: reuelt on March 24, 2019, 12:27:47 AM

You need to find out the exact Brand and Model of your 2.2K VFD inverter & the BOB first. Then try to get hold of their manuals.
Not all VFD inverters are set up and connected the same way.