Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: piouyt on March 08, 2019, 12:37:24 AM

Title: sketcher
Post by: piouyt on March 08, 2019, 12:37:24 AM
Is it possible to enter into sketcher workbench directly?
Title: Re: sketcher
Post by: joeaverage on March 09, 2019, 01:41:05 PM
what do you mean?

What is 'sketcher workbench'? I assume it is some sort of drawing program. If that is the case then no, Mach4
will not run such a program.

The normal course of events is to use a drawing or drafting program to draw your part. The use a CAM program
(and post processor file) to generate GCode.

GCode is the standard code required by the vast majority of CNC machines and for which CNC software like Mach4