Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: gosha-sys on February 16, 2019, 05:40:36 PM
-
crashes on launch when GUI run several previous builds too.
tried on different computers
windows 7pro 64 (32)
intel cor2 duo 3.00 4ram 512 nvidia Ethernet SmoothStepper
Before the version4.2.0.4054 was launched but there were problems with keyboard jog...
-
Try this: go into your Mach4Hobby folder and find Mach4GUI.exe. Right-click and go to Properites>Compatibility. Click 'Run this program in compatibility mode for' and choose Windows 7. Hit Apply, OK, and then try opening Mach4.
recommendation from Bryanna Bates - ArtSoft / Newfangled Solutions
-
Had same problem with releases newer than 4054 on Win7 32 bit.
This was resolved using the above compatability fix thanks.
Allan