Machsupport Forum
Third party software and hardware support forums. => PoKeys => Topic started by: jakeb on February 13, 2019, 04:13:37 PM
-
I am setting up a lathe with a M16D pokeys motion controller. I am using mach4 with the mach4 lathe plugin from cnc4pc. I can get movement of X/Z axis but having issues getting the relays to control my VFD for the spindle.
They are setup in both the pokeys plugin and mach config but when I click forward or reverse I get no relay clicking. There are red LEDs on for each relay and what I think is the 0-10v for vfd PWM control.
I am sure I am missing something but don't know what.
Any help would be great.