Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: djrvt on February 11, 2019, 01:42:17 PM

Title: what I want is when the signal of input 2 is active is activated move Y to 200
Post by: djrvt on February 11, 2019, 01:42:17 PM
this is what I want I do not know how to do it
know if you can help me


what I want is when the input 1 signal is active activates cycle start


what I want is when the signal of input 2 is active is activated move Y to 200


look at the image please