Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: olf20 on February 09, 2019, 12:13:51 PM
-
For those of you who might still using a parallel port
what brand / source of card are you using for Win7.
Thanks for any help!!
olf20 / Bob
-
Hi,
its been a long time since I used a parallel port....I have given my PCI card away.
PMDX stock one that works:
https://www.pmdx.com/1PARPCI (https://www.pmdx.com/1PARPCI)
Craig
-
Thanks Joe!
olf20 / Bob