Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Fred_evans on February 07, 2019, 08:19:54 PM

Title: I need a simple code writer for lathe
Post by: Fred_evans on February 07, 2019, 08:19:54 PM

Hello Chaps,
please help me find a simple program for writing the gcode for a lathe.
(or point me to a topic discussing this matter)
many thanks

Title: Re: I need a simple code writer for lathe
Post by: stevehuck on February 08, 2019, 05:49:45 PM

I use CAmBam. I just finished a lathe and it does take care of my needs pretty well.

Title: Re: I need a simple code writer for lathe
Post by: Fred_evans on February 09, 2019, 03:35:23 AM

thanks steve--
I have a copy of cambam somewhere and I will try it out again
regards

fred