Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: jeff1973 on February 06, 2019, 01:17:42 PM

Title: Gear box high and low gear
Post by: jeff1973 on February 06, 2019, 01:17:42 PM
My mill is almost ready the only major thing left is the spindle abart from small safety nitty gritty that I have to implement but when I finish the spindle I can start generating chips
So I searched alot on the forum try to find something similar but I had no luck
The machine has a hydraulic gear change so I have 2 digital inputs and 2 digital outputs so I do not know from where to start from it also have a VFD so I would like to for example from 0 to 200 rpm on the low gear and from 200 to 1250 rpm on the high gear since I a very new for mach4  I have no idea how I can make the script for it
Can anyone help