Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Nobima on January 29, 2019, 07:30:40 AM

Title: Mach3 foam-cutter hotkey
Post by: Nobima on January 29, 2019, 07:30:40 AM

Hello,

For my foam-cutter I need in Mach3 hotkeys to move the  X/Z and Y/A axis simultaneously. If I try to set both axis in the System Hotkeys to the same ScanCode only one axis move.
Is there a way to create the required hotkeys, perhaps macros ?

Thanks in advance.
Nobima