Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: jeep534 on January 22, 2019, 08:04:30 AM
-
I am retrofitting a lathe and need some information as I have been away from the forum for some time and have not been following along
thank you
archie
-
We use the HiCON Integra from Vital Systems. A little pricey; but it is has threading and is well supported by Vital Systems.
You do need to have encoder feedback from the spindle to the Integra.
I know there are others but I can't tell you which ones, we only use the Integra now.
-
pmdx