Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: gabartey38 on January 13, 2019, 01:21:14 AM
-
Hello, I want to use G28.1 in my gcode. G28.1 Z0.0 is working , Z axis going to reference. My problem when Z axis go to reference , it go reference again again . This prosess is continuous. What is reason of this?
-
You would normally call G28.1 with a G91 on the line :-
%
G21 G40 G49
G91 G28.1 Z0 (this will find/search for home position)
%
or
%
G21 G40 G49
G91 G28 Z0 (this will go to known home position)
%