Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: KatzYaakov on January 07, 2019, 02:47:43 PM

Title: pass parameters to M function
Post by: KatzYaakov on January 07, 2019, 02:47:43 PM
is there way to pass parameter to M function?
like:
M1000(4)
Title: Re: pass parameters to M function
Post by: joeaverage on January 07, 2019, 04:36:41 PM

http://www.machsupport.com/forum/index.php/topic,28528.0.html (http://www.machsupport.com/forum/index.php/topic,28528.0.html)


Craig