Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: jve on December 26, 2018, 10:36:54 AM

Title: auto soft limits
Post by: jve on December 26, 2018, 10:36:54 AM

Hi Every one ,

I would like to set mach3 to set the soft limit button automatically after reference but when the machine is not referenced the soft limit led will go off ,  anyone has a ready script?

Title: Re: auto soft limits
Post by: joeaverage on December 26, 2018, 01:06:26 PM

Hi,
do you have home switches? Soft limits only work once a machine has been 'homed' or 'referenced' to a particular and repeatable location at the
beginning of each Mach session. That normally means home switches are required.

Craig

Title: Re: auto soft limits
Post by: jve on December 26, 2018, 02:51:32 PM

I resolve the issue I done this by brains very easy