Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: stevehuck on December 23, 2018, 06:24:56 PM

Title: Cycle start button on panel?
Post by: stevehuck on December 23, 2018, 06:24:56 PM

I tried to search the forum but the search funtion is broken.

I would like to add an E-stop and cycle start button to the control panel on my lathe. The E-stop seems easy but the cycle start isn't as clear. I found this in the Mach3 docs.

Enable and define OEM Trigger inputs if you want electrical signals to be able to call OEM
button functions without a screen button needing to be provided.

I assume i would use one of these inputs? I can wire the buttons and configure the inputs but I cant find a way to define the chosen OEM input to trigger a Funtion "0" or cycle start.

Am I on the right track? There is no further info in the docs about OEM inputs. Is a Cycle start button possible?

Title: Re: Cycle start button on panel?
Post by: stevehuck on December 23, 2018, 06:30:35 PM

Found it!

It's in the system hotkeys setup. I have some testing to do.

Title: Re: Cycle start button on panel?
Post by: davidruizv@gmail.com on July 11, 2019, 01:58:12 PM

Hola señores, alguien ha podido conectar y configurar bien los finales de carrera de esta tarjeta???, por favor ayuda. gracias.