Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: francopuk on November 15, 2005, 03:45:15 AM

Title: 4° axis help
Post by: francopuk on November 15, 2005, 03:45:15 AM

Hi, i search any example of g-code for working 4° axis (for example write on the pipeline or tube)
thank in advance
Franco

Title: Re: 4° axis help
Post by: Brian Barker on November 15, 2005, 01:43:44 PM

Franco,
You are going to have to have Y axis sub... This is done in the low cost cam systems and you are going to have to use a cam system to make the code.
Hope that helps
Brian