Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Verminator10 on December 04, 2018, 08:35:40 AM
-
Hi,
I am running Mach3 V03.043.044
My problem is with backlash compensation, when i add values in the compensation window for an axis they have absolutely no effect.
if i raise the value by 3x still no effect.
Can anyone advise please?
Thanks,
Carl ???
-
See info below from specs on CS Lab site for the IP-M controller, no backlash comp with it, only the IP-A and IP-S have it.
-
Thank Hood
Carl