Machsupport Forum
Support => Downloads => Post Processors => Topic started by: ryghar on November 12, 2018, 07:36:15 AM
-
Hello,
Can anyone help me to configure Mastercam 2018 to worrk with Mach3 3axis?
I found a post naming the file Boss_Mach3.txt but I cant find it, the link is broken.
Thank you so much!!!
-
Hi Ryghar,
The forum is currently having some issues with links - hopefully it will all be fixed soon.
In the meantime this is the corrected link you have referred to; http://www.machsupport.com/forum/index.php/topic,1306.msg7315.html#msg7315
Tweakie.
-
Excellent!!
Thanks!!
-
I saw on utube, you can migrate from mastercam X7 to mcamx17 then to mcamx18. Have you tried this one ? Successful ?