Machsupport Forum
Mach Discussion => FAQs => Topic started by: GregF on November 06, 2018, 11:24:39 PM
-
MeshCAM generates files as *.m but Mach 3 doesn't recognize it as g-code? Where do I go from here?
-
In MeshCAM, when you click "Save Toolpath", below the filename, under "Save as type", you need to select a Mach3 post processor. It looks like you are using the Anilam post processor, which is the first one in the list.
-
Thanks Gerry. Yeah saving it as a tap file works OK