Machsupport Forum

Mach Discussion => Brains Development => Topic started by: gunther on November 06, 2018, 09:38:56 AM

Title: how to translate modbus input to limit/home switches.
Post by: gunther on November 06, 2018, 09:38:56 AM

HI all!

I got my modbus working finaly but now i have a new problem.
Using brain i read the inputs from my plc and forward them to inputs like x-limit-+++ and so on.
However when i activate a limit switch the axis keep moving.

When i look at the debug screen i see all my switches are working.
Am i doing something wrong?

Thanks in advance

Title: Re: how to translate modbus input to limit/home switches.
Post by: gunther on November 09, 2018, 03:52:18 AM

Anyone can help?

Or forward me to a document that covers modbus tcp/ip in mach3.
Google send me to a wiki where is no info at all :(