Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: MTJONES on November 02, 2018, 09:54:07 PM

Title: Mach 3 will not open
Post by: MTJONES on November 02, 2018, 09:54:07 PM
Hello,

I am using Mach 3 version 3.43.  When I attempt to open the program it loads and shows the screen set but then turns black and restarts the computer.  This machine  has worked for 7 years.

Windows 7 with current updates
1024 screen set
recently loaded Teamviewer 14

Can anyone help?

Morgan
Title: Re: Mach 3 will not open
Post by: joeaverage on November 02, 2018, 10:51:42 PM
Hi,

Quote
Windows 7 with current updates

That is the problem.....recent Windows7 updates from Microsoft have caused a problem with Mach3, or more precisely
Mach's parallel port driver.

There are some recent threads about it.

It seems your choice is to un-wind the offending updates OR move to an external motion controller like a SmoothStepper or UC300.

Craig
Title: Re: Mach 3 will not open
Post by: Tweakie.CNC on November 05, 2018, 01:42:31 AM
This thread may help as it refers to the problem; http://www.machsupport.com/forum/index.php/topic,38269.0.html