Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Tonny91 on October 16, 2018, 10:11:25 PM
-
I'm sure there is an easy answer for this. i had to replace my PC a week ago. i reloaded and for the most part, everything works.
When using mach3turn however, i can't get m5 to start the spindle. When i click on the spindle button, it's just M5 won't start it.
-
It's M3 / M4 which starts the spindle M5 stops the spindle.
Tweakie.