Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ronald4418 on August 02, 2007, 04:18:13 AM

Title: Drivers
Post by: ronald4418 on August 02, 2007, 04:18:13 AM

Does anyone have a listing for a bi-level driver that'll work with Mach3?
 I understand that cards of this design are more stable and aren't effected by the interference issues that affect chopper style driver cards. I need a driver that can be hooked up to 8 wire Nema 34 steppers that if wired in parallel require 3.05 volts per phase.

Title: Re: Drivers
Post by: Brian Barker on August 02, 2007, 07:07:26 AM

You will need to do about 30V (name plate X10).. Have a look on the web at Gecko drive or the drives from Keling.

thanks
Brian