Machsupport Forum

General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: Duael on September 02, 2018, 12:53:34 AM

Title: "Black Scholes", Coin #1
Post by: Duael on September 02, 2018, 12:53:34 AM

New member here.
I've been using LinuxCNC for a few years on the PocketNC, a desktop 5 axis with a small work area of approx 4x4x3.
I recently upgraded to a 12x20x5 gantry style 5 axis with a 2.2kw water cooled spindle.

While working with the PocketNC, I started a series of approximately eight sculptures.
Made with Mexican 1/2 & 1/4 in thick Royal Ebony (Katalox) laminated with 0.04in plate Cartridge Brass.
The finished cut wood is them stained with liquid Graphite.

Only one coin was finished before I traded up, so I am looking forward to finishing the rest.

Blog post here: (

Sales website here:
Title: Re: "Black Scholes", Coin #1
Post by: Tweakie.CNC on September 02, 2018, 01:47:16 AM
Excellent work Robert, thanks for sharing.