Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: peter81 on August 27, 2018, 11:17:08 AM

Title: Need help stepper + drive
Post by: peter81 on August 27, 2018, 11:17:08 AM

Hello all,
I need quick help regarding suitable drive for this stepper motor - https://www.ebay.ie/itm/Nema-23-Stepper-Motor-Bipolar-2-0Nm-285oz-in-For-CNC-Schrittmotor-Steuerung-8mm/141860786801?hash=item21078fd271:g:0XsAAOSw44BYUMFq

Will this drive be ok?

 https://www.aliexpress.com/item/3pcs-Updated-version-of-TB6600-StepperMotor-Driver-4A-9-42V-TTL-16-Micro-Step-CNC-1/32825754783.html?spm=2114.search0104.3.30.6d763ceclAQBZ0&ws_ab_test=searchweb0_0,searchweb201602_2_10152_10151_10065_10344_10068_10342_10343_10340_10341_10696_10084_5724015_10083_10618_5724315_10304_10307_10820_10301_10821_5724215_5724115_10059_5013715_100031_5725015_10103_5724915_10624_10623_10622_10621_10620_5013815-normal#cfs,searchweb201603_13,ppcSwitch_4&algo_expid=56431452-e949-435c-8aa6-8b53cd1a2ac7-4&algo_pvid=56431452-e949-435c-8aa6-8b53cd1a2ac7&priceBeautifyAB=0

Thanks,
Peter

Title: Re: Need help stepper + drive
Post by: garyhlucas on August 27, 2018, 01:45:03 PM

Yes it will work but I think you’d do better to get an equivalent Leadshine drive.  Still chinese but based on better technology and considered to be very good drives.

Title: Re: Need help stepper + drive
Post by: joeaverage on August 27, 2018, 02:39:06 PM

Hi,
yes it will work, but buy some spares....they tend to blow up. They are based on a Toshiba IC and they are tender. Note the max voltage is only 42V.

As Gary has said Leadshine do better, the AM882 is very capable. 80V max

If you don't mind paying extra then look at Gecko drives, top quality.

Craig

Title: Re: Need help stepper + drive
Post by: peter81 on August 27, 2018, 03:37:20 PM

Ok thanks very much for help.

Regards,
Peter