Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: mossman on March 26, 2006, 01:11:00 AM

Title: Post Processor Install
Post by: mossman on March 26, 2006, 01:11:00 AM

I have a basic question.

I am trying to install the post processor file for OneCNE lathe for use with Mach3.

I have found the file, but I don't know where to put it.

Help please.

James

Title: Re: Post Processor Install
Post by: mossman on March 29, 2006, 01:10:44 AM

I thought I would reply to myself.  It is really a OneCNC issue.

The file should go in the OneCNC setup directory, along with the standard profiles that are already in that directory.

James

Title: Re: Post Processor Install
Post by: Brian Barker on March 29, 2006, 06:08:42 AM

Sorry I coudln't help you on it :( I run Feature cam...

Title: Re: Post Processor Install
Post by: bigbigjimbo on July 19, 2006, 08:54:09 AM

Hi James,
Would it be possible to attach the post for Onecnc, I am looking for it but can not find it anywhere is, Also is it just the lathe one you have.
jim

Title: Re: Post Processor Install
Post by: mossman on July 19, 2006, 11:09:34 PM

I am was using the post processor for the Lathe XR only.  I just got a mill, but have not tried it yet with OneCNC.

I will link to a couple of forum's where I found the post processor from another user who wrote it ("PoppaBear").

The first is the files section of the Yahoo Mach1Mach2cnc group.

http://groups.yahoo.com/group/mach1mach2cnc/files/%20Posts%20%28CAM%20Postprocessors%29/

The second link is to CNCzone.com -- it has many forums.  This link is to the  "Machine Controllers Software and Solutions > Mach Software (ArtSoft software) > Screen Layouts, Post Processors & Misc" forum.

http://www.cnczone.com/forums/showthread.php?t=16860

Hope that helps.

James