Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: jbraddock on July 10, 2018, 11:36:23 PM

Title: Pokeys 57cnc
Post by: jbraddock on July 10, 2018, 11:36:23 PM

I'm using Mach 4 with pokeys 57cnc,... I got limits an home switches setup right to work together,  but when i home it,  it doesn't back off so if I try to jog it will activate a limit error,... I can get it to back off in the Mach settings using the back off function,... I set it to like 2.00 or - 2.00 on some an it fixes my issue but leaves my dro now not Zeroed,... I don't want to have to hit zero every time I home my machine,... What's the fix for this or is it not gonna throw off all my gcode,....