Machsupport Forum

General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: aranda1984 on July 22, 2007, 04:34:00 PM

Title: Glue dispenser CNCs
Post by: aranda1984 on July 22, 2007, 04:34:00 PM

A couple of my machines that will go out with MACH3 or EMC2  OS in the future!

Unibody sheet metal box type base construction, no welded frame!
Laminated aluminum table top, 25 mm timing belt drive for fast and silent action. DC servos with planetary gear box reduction (Helical gears)
ABBA linear guide rails! 

Rigid enough for a 5HP router also with either a rack and pinior or ball screw drives.

Stephen I. Molnar

Title: Re: Glue dispenser CNCs
Post by: DennisCNC on July 22, 2007, 10:49:26 PM

Thats it very nice!!  Put up a video when you get a chance.

Title: Re: Glue dispenser CNCs
Post by: aranda1984 on July 24, 2007, 02:11:33 PM

I am sorry, but the machines have been shipped and I never made a video.. but I have a video from a twin head large glue applicator that was built to be  part of a production line in a door manufacturing plant.

Stephen