Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: jonas60526 on July 01, 2018, 01:39:01 PM
-
I would like to rework the Mach4 jogging screen, since I find stepping through all the increments cumbersome.
I want to have a button that turns on continuous jogging and some buttons that turn on incremental jogging and set a different value for the step for each button. I have figured out how to set the jog mode, but can not figure out how to change the step value. The screen uses the built in action "cycle jog increment". I still have not figured out where the actions are defined, so can not figure out how to change this value.
Is there a simple way to change the incremental jog step value?
Thanks
Jonas
-
See this topic:
http://www.machsupport.com/forum/index.php/topic,37378.msg255652.html#msg255652
(http://www.machsupport.com/forum/index.php/topic,37378.msg255652.html#msg255652)
Allan