Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Overloaded on June 03, 2018, 08:26:56 AM

Title: CamBam for LATHE
Post by: Overloaded on June 03, 2018, 08:26:56 AM

Hi folks.
Is anyone using CamBam with their lathe plugin ?
I'm wondering about the stage of development it is at and any experiences with it so far.
I have it in trials and understand its current limitations but am having problems getting it to perform as described.
Any actual user input is much appreciated.
Thanks,
RC
 :)

Title: Re: CamBam for LATHE
Post by: garyhlucas on June 03, 2018, 07:51:24 PM

Much as I like and use Cambam the lathe functionality is very poor.  I have turned parts with it, but facing is difficult and boring simply can't be done.